Aluminum Chlorohydrate Solution BP USP NF IP Reagent FCC Food Grade Manufacturers Exporters
Back

Aluminum Chlorohydrate Solution

Test Specification...USP
Appearance It occurs as clear to yellow hazy liquid
Identification Test A Test B Test C Test D
  1. Test for aluminium and Chloride
  2. Test for Propylene Glycol
  3. Test for Dipropylene Glycol
  4. Test for alcohol
Arsenic Not more than 2 ppm
Limit of Iron Not more than 75 ppm
pH 3.0–5.0
Residual Solvents Meets the requirements
Assay- 1. Content for chloride 2. Content of Aluminum 3. Aluminum/Chloride Atomic Ratio 4. Concentration 1.Each mL of 0.1 N silver nitrate is equivalent to 3.545 mg of chloride (Cl). Use the chloride content thus obtained to calculate the aluminum/chloride atomic ratio. 2. Each mL of 0.1 M Edetate disodium titrant consumed is equivalent to 2.698 mg of aluminum (Al). Use the aluminum content thus obtained to calculate the aluminum/chloride atomic ratio. 3. 1.91: 1 to 2.10: 1 4. 90.0%–110.0% of the labeled concentration of anhydrous aluminum chlorohydrate

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.

Enquiry