Ethyl Oleate BP USP NF IP Reagent FCC Food Grade Manufacturers Exporters
Back

Ethyl Oleate

Test Specification...BP
Appearance Clear, pale yellow or colorless liquid.
Identification-

Test A

Test B

Test C

A. Test for Relative density

B.  Test for Saponification value

C.  Test for Oleic acid

Solubility Practically insoluble in water, miscible with ethanol (96 per cent), with methylene chloride and with light petroleum (bp: 40-60 °C).
Relative density 0.866 to 0.874
Acid value Not more than 0.5
Iodine value 75 to 90
Peroxide value Not more than 10.0
Saponification value 177 to 188, determined on 2.0 g
Oleic acid Not less than 60.0%in the fatty acid fraction of the substance to be examined.
Water Not more than 1.0%
Total Ash Not more than 0.1%
Test Specification...USP
Appearance It occurs as mobile, practically colorless liquid, having an agreeable taste.
Identification

Test A

Test B

  1. Presence of Ester
  2. Chromatographic Identity
Solubility Insoluble in water. Miscible with vegetable oils, with mineral oil, with alcohol, with most organic solvents.
Total ash Not more than 0.1%
Iodine value 75-85
Peroxide value Not more than 10.0
Water determination Not more than 1.0%
Residual solvents Meets the requirement
Assay Not less than 65.0% of ethyl oleate

Shelf life, Storage and Packing
It should be stored in a segregated area in a cool and ventilated place away from combustible materials. Keep in a tightly closed container, sealed until ready for use. It is packed in 25kg or 50kg HDPE bags or drums as required.

Other
GLP, cGMP (FDA) Approved, ISO 9001, ISO 14001, ISO 45001, ISO 17025, ISO 22000, FSSC 22000, FSSAI, Halal and Kosher certified.
We observe WHO Good manufacturing practice and Good laboratory practice.

Enquiry